Hoarders
Watching television these days you’ll find a lot of so called reality shows on the air waves. I sat thru one of these hoarding shows, and quite frankly
I wasn’t surprised at all. I’ve seen this same thing in cars, trucks, and vans.
Junk, trash, and just about anything you could think of piled up inside the
car and/or in the bed of the truck. The one thing that seems to be common
with every one of them is the mess. It’s not so much the piles of crap that
they keep in their vehicles, but how they keep their stuff. It’s always a
disorganized mess with no rhyme or reason of organization.
Tool Hoarding
I can’t work like that myself. Now, I’m not all that neat with my tool box. But it’s at least an organized chaos. Sockets and extensions of the same ratchet size in one area, cutting tools in another, screw drivers and pliers all have their own places. I actually use several tool boxes to store my 30+ years of variety of tools. Even with the tool boxes, I still have to have other tools that come in their own protective plastic molded boxes on shelves neatly labeled as to what is in each box, in order to retrieve them when needed. Older, out of date tools seem to always end up in lower and lower drawers. I can’t even tell you where my dwell meters are these days… haven’t seen them in years. Now I see the same trend in old scanners. The pile is getting larger and larger. I still have an old MatCo 4000E and a few other ones on one of the lower shelves. I don’t think I’ve turned them on in years, but all the cards and cords are there. It’s almost funny, (in a weird way) that each time you update a scanner, the new scanner generally will do all the older systems. So instead of pulling out your old scanner I’ll reach for the new one every time. So what happens to that old scanner? It will end up with that old dwell meter somewhere out of sight and forgotten. These days I find myself “hoarding” some of these new tools, and just for a chance to use them. Special headlamp assembly removal tools, belt tools, shocks wrenches, front end disassembly tools, suspension tools, and so much more. Most of which I may only see use once, but it may be the one thing that makes the job go easier. For example, I’ve done several of the water pumps on the “North Star” engines, and with the right tool it’s an easy job. I wouldn’t even begin to think of doing it without it. The tool wasn’t cheap, but at some point in time it too will end up in the bottom of the box. I don’t think of myself as a tool hoarder, or a collector. I just want the right tool for the right job. These tools can be costly, keeping them clean and well kept helps me maintain them for a long time. Without the right tool, the job isn’t as easy, so anytime I can get the correct tool I will. Then, there are those homemade tools that I have a tougher time sending to the deep dark pockets of the lower drawers. At the time I needed it, these cut down tools or sockets I ground down made sense. Now looking in the drawer at some of these handmade marvels I have to wonder what that certain shape or improvised tool was ever for. If I can't remember what it was for chances are it was a one time deal. So now that particular tool probably the next tool that will get “re-made” into the next handmade wonder. I’ll hoard these tools for a long time, I just can’t part with them so easily.
I’ve also seen guys who have huge boxes of tools that have every single socket and screw driver so perfectly placed in their tool boxes that they resemble museum pieces. I’ve even seen a guy who had a huge, and I mean huge, selection of hammers… of various sizes and lengths. All these hammers were lined up on overhead racks equally spaced apart, and put into a pattern from small to large, and by handle length. A thing of beauty to a tool guy like myself. Not that practical in my point of view though. I mean, really, how many hammers do ya need? A hoarder? No not really. I think it actually falls under the category of collector. Collectors take pride in what they have, and are proud to display them in an orderly fashion. The Hoarders Car
One thing that goes along with those hoarders’ cars and trucks is the stench… OMG… always, always, always it smells like something died in there. I’ll bet doctors could tell some horror stories dealing with people and their hygiene, and I’m sure I’m not the only tech who has dealt with the smelly car from hell. Nasty, is the only way to say it… putrid, awful, and disgusting. YUK! Well, then again, it’s work… not pleasant work, but it is work. I think the worst one that I can remember getting into was a Chevy van with a heater core leak. The van was stacked level with the windows front to back with the most horrendous conglomeration of junk I’ve ever had to deal with. There was only enough room for the driver and barely any room to move the gear shift lever. Totally disgusting, and even more to the point that smell, that awful unforgettable smell! Papers, fast food bags, clothes, shoes, and anything else you can think of. I always try to put things back in order that I take things out of a glove box or trunk, but, there was no way to “re-stack” everything back in on this “hoarder-mobile”… it was an intertwined hap-hazard pile of putrid junk. All I could do was grab handfuls of this stuff and throw it on the shop floor. In fact, I gave the lady the estimate based on book time… then I crossed out the book time, and told her that the book time doesn’t apply due to the conditions I’m working in. She still said go for it… so I did. With an aspirator, plastic gloves and a long sleeve jacket that I planned to throw out as soon as I was done. I “dove” right into my work on this reeking pile of refuse, and finished it as quickly as I could. You know, I really should have done this job outside, because the stench lingered in the shop for weeks.
These people have a serious mental problem, but most of them don’t see it as a problem. I’m no doctor, so I probably shouldn’t make diagnostic claims on things I know nothing about, I’m just a mechanic. I’ll try to deal with junk and the smell, get the job done, and move on to the next one. (Hopefully a more pleasant one). When you finish with one of these jobs, don’t forget to wipe your tools down before you neatly place them back into your tool box. Messy tools and a messy shop aren’t very presentable, but for some customers it’s not a concern of theirs how their vehicle looks or smells, they just want the car fixed. Even though I’ll fix the car, the smell and the sight of these trash cans on 4 wheels sure does get to me. Yuk!
